- Teseq worldwide
-
Product
Description
-
NSG 4070C
The NSG 4070 is a multi-functional device for carrying out EMC immunity tests to accompany development and conformity testing in accordance to IEC / EN 61000-4-6, Namur and several automotive BCI standards.
-
BHA 9118
The BHA 9118 is a linearly polarised broadband antenna which is ideal for many applications particularly EMC/RF measurements.
-
CBA 1G-030D
1 MHz to 1 GHz 30 Watt Broadband Power Amplifier
-
CBA 1G-100D
1 MHz to 1 GHz 100 Watt Broadband Power Amplifier
-
CBA 1G-150D
80 MHz to 1 GHz 150 Watt Broadband Power Amplifier
-
CBA 1G-300D
80 MHz to 1 GHz 300 Watt Broadband Power Amplifier
-
CBA 1G-600D
80 MHz to 1 GHz 600 Watt Broadband Power Amplifier
-
CBA 1G-1200D
80 MHz to 1 GHz 1200 Watt Broadband Power Amplifier
-
CBA 3G-050B
800 MHz to 3.1 GHz 50 Watt Broadband Power Amplifier
-
CBA 3G-100B
800 MHz to 3.1 GHz 100 Watt Braodband Power Amplifier
-
CBA 3G-300B
800 MHz to 3.1 GHz 300 Watt Broadband Power Amplifier
-
CBA 3G-500B
800 MHz to 3.1 GHz 500 Watt Broadband Power Amplifier
-
CBA 4G-900/600R
0.8 GHz to 4.0 GHz 400 Watt P1dB Single Band Power Amplifier. Tuned for 900 watts CW 1.2-1.4GHz and 600W CW 2.7-3.1GHz
-
CBA 6G-030D
1 GHz to 6 GHz 30 Watt Single Band Power Amplifier
-
CBA 6G-050D
1 GHz to 6 GHz 50 Watt Single Band Power Amplifier
-
CBA 6G-100D
1 GHz to 6 GHz 100 Watt Single Band Power Amplifier
-
CBA 6G-200D
1 GHz to 6 GHz 200 Watt Single Band Power Amplifier
-
CBA 6G-400D
1 GHz to 6 GHz 400 Watt P1dB Single Band Power Amplifier
-
CBA 100M-110
10 kHz TO 100 MHz 110 Watt Class A Broadband Amplifier
-
CBA 100M-400
10 kHz to 100 MHz 400 Watt Class A Broadband Amplifier
-
CBA 230M-035
150 kHz to 230 MHz 35 Watt Class A Broadband Amplifier
-
CBA 230M-080
150 kHz to 230 MHz 80 Watt Class A Broadband Amplifier
-
CBA 250M-2500
10 kHz to 250 MHz 2500 Watt Class A Broadband Amplifier
-
CBA 400M-110
10 KHz to 400 MHz 100 Watt Class A Broadband Amplifier
-
CBA 400M-260
10 kHz to 400 MHz 260 Watt Class A Broadband Amplifier
-
CIP 9136A
The CIP 9136 probe has been manufactured to drawings and specifications laid down by QinetiQ.
-
CIP 9138
The CIP 9138 probe has been designed for MIL-STD-461G CS114.
-
Compliance 5 Emission
Compliance 5 is sophisticated EMC laboratory control software designed to make RF Emission testing fast, efficient, compliant, accurate and simple.
-
Compliance 5 Immunity
Compliance 5 is sophisticated EMC laboratory control software designed to make RF Susceptibility/Immunity testing fast, efficient, compliant, accurate and simple.
-
CSP 9160
The CSP 9160 is a broadband RF current sensor probe as defined in CISPR 16-1-2. Beside the compliance measurements of asymmetrical disturbance currents as e.g. required in CISPR 16-2-1 and CISPR 22, the probe can be used in a number of diagnostic applications to measure superimposed RF currents flowing in conductors, or cable harnesses.
-
DCP 0100A
This high power dual directional coupler has been specifically designed for EMC immunity applications.
-
GTEM 1750
The GTEM 1750 has a maximum septum height of 1750 mm and is suitable for emissions and immunity testing.
-
HV-AN 150
The artificial network HV-AN 150 covers several applications and standards in the Automotive, Airborne and MIL range. It
offers the right solution for both high current and high voltage EUTs. -
IOB 4000
The Input/Output Box, in short IOB 4000, is an ideal addition for electromagnetic immunity test systems.
-
ITS 6006B
The ITS 6006B consist of an integrated RF signal generator, RF switch and EUT monitoring interfaces. The unit is designed for various radiated EMC applications in the 80 MHz to 6 GHz frequency range.
-
LNA 6000
The LNA 6000 is a low noise amplifier with 12.5 dB of gain covering the nominal frequency range 1 MHz to 3 GHz and can be used in the range from 200 kHz to 4 GHz.
-
LNA 6900
The LNA 6900 is a low noise amplifier with 25 dB of gain covering the nominal frequency range 9 kHz to 2 GHz and can be used up to 4 GHz.
-
LNA 6901
The LNA 6901 is a low noise amplifier with typ. 28 dB of gain covering the nominal frequency range 9 kHz to 1 GHz and can be used up to 2 GHz.
-
MD 4070A
The monitoring device MD 4070 can be used as an active or passive current sensor probe to measure the current in a conductor without connecting it directly.
-
NSG 1007
Programmable AC/DC power source (3 - 15 kVA) for single and three phase applications
-
PA 5740
This battery simulator is designed specifically for automotive EMC testing, Teseq’s 42 V ready power amplifier sets the pace for automotive battery simulation including features necessary for automotive immunity testing such as sense wires for cable voltage drop compensation and several operating modes for stability with complex automotive loads.
-
PA 5840
This battery simulator designed specifically for automotive EMC testing, Teseq’s 42V ready amplifier sets the pace for automotive battery simulation including features necessary for automotive immunity testing such as sense wires for cable voltage drop compensation and several operating modes for stability with complex automotive loads.
-
PCJ 9201
The PCJ 9201 meets all the requirements and provides additionally a save way for measuring the insertion loss of current sensing probes and monitoring probes.
-
PMU 6003
The PMU 6003 is designed for connection to the USB interface. It includes software that allows multiple power meter readouts at the same time.
-
PMR 6006
The PMR 6006 is designed for direct connection to the ITS 6006 Immunity Test System. Up to three power meters can be connected.
-
PMU 6006
The PMU 6006 is designed for connection to the USB interface. It includes software that allows multiple power meter readouts at the same time.
-
ProfLine 2103
Single phase 3 kVA system to measure harmonics and flicker in accordance with IEC 61000-3-2 and IEC 61000-3-3. Supporting testing on products consuming up to 11 Arms and 92 A peak @ 230 VAC
-
ProfLine 2105
Single phase 5 kVA system up to 16 A to measure harmonics and flicker in accordance with IEC 61000-3-2 and IEC 61000-3-3.
-
ProfLine 2115
Three phase 15 kVA system (5 kVA per phase) up to 16 A to measure harmonics and flicker in accordance with IEC 61000-3-2 and IEC 61000-3-3.
-
ProfLine 2130
Three phase 30 kVA system (10 kVA per phase) up to 43 A to measure harmonics and flicker in accordance with IEC 61000-3-2, IEC 61000-3-3, IEC 61000-3-11 and IEC 61000-3-12.
-
ProfLine 2145
Three phase 45 kVA system (15 kVA per phase) up to 62 A to measure harmonics and flicker in accordance with IEC 61000-3-2, IEC 61000-3-3, IEC 61000-3-11 and IEC 61000-3-12.
-
RC Chamber 2XS
Reverberation Chambers (RCs) are modern EMC test environments in addition to the established methods like semi- or full anechoic rooms, open area test sites or (G)TEM cells.
-
RC Chamber XS
Reverberation Chambers (RCs) are modern EMC test environments in addition to the established methods like semi- or full anechoic rooms, open area test sites or (G)TEM cells.
-
RC Stirrer L
Stirrer size L, remote controlled, incl. gear motor for step-wise and continuous rotation, positioning accuracy +/- 0.5°, smallest step 0.1°, motor installed inside chamber, specified up to 600 V/m CW, incl. EMC filter, cables and stirrer control unit with remote interface and driver for C5I software
-
RC Stirrer M
Stirrer size M, remote controlled, incl. gear motor for step-wise and continuous rotation, positioning accuracy +/- 0.5°, smallest step 0.1°, motor installed inside chamber, specified up to 600 V/m CW, incl. EMC filter, cables and stirrer control unit with remote interface and driver for C5I software
-
RC Stirrer S
Stirrer size S, remote controlled, incl. gear motor for step-wise and continuous rotation, positioning accuracy +/- 0.5°, smallest step 0.1°, motor installed inside chamber, specified up to 600 V/m CW, incl. EMC filter, cables and stirrer control unit with remote interface and driver for C5I software
-
RFB 6000
RF Switch Network
-
SW 4070, SW 4070-MAN
The SW 4070 allows to switch the signal paths for having a remote controlled system and is fully powered and controlled by the NSG 4070.
-
SW 6012
The SW 6012 adds two SPDT switches to the built-in switching network of the ITS 6006. It is fully powered and controlled by the ITS 6006.
-
UPA 6108
The UPA 6108 and UPA 6109, suitable for CISPR/IEC/EN, FCC, MIL-STD testing, are small yet rugged antennas covering the frequency range 200 MHz - 1 GHz (UPA 6109), and 300 MHz - 1 GHz (UPA 6108).
-
UPA 6109
The UPA 6108 and UPA 6109, suitable for CISPR/IEC/EN, FCC, MIL-STD testing, are small yet rugged antennas covering the frequency range 200 MHz - 1 GHz (UPA 6109), and 300 MHz - 1 GHz (UPA 6108).
-
VBA 6106
The VBA 6106A is suitable for CISPR/EN, FCC and MIL-STD testing across the frequency range 30-300 MHz.
-
WIN 6000
Teseq provides with the WIN 6000 a device control software with NSG 4070 and ITS 6006 for performing conducted and radiated susceptibility tests as defined by international standards.
Products
Applications
Industries
Service
Imprint
AMETEK CTS GmbH
Sternenhofstr. 15
4153 Reinach, Switzerland
Tel.+ 41 61 204 41 00
marketing.cts@ametek.com
Managing Directors:
Brian Huntsman
Astrid Wälchli Schreiber
VAT-ID: CHE-179.452.414
Register of companies: CH-280.4.015.069-3