Back to home
Ametek
 

IEC/EN 61000-3-12

Harmonics are “non-linear” Currents or Voltages in an electrical distribution system, caused by non-linear loads (i.e. loads that draw current with a waveform that is not the same as that of the supply voltage).
Typical devices that cause harmonics are motor driven equipment, domestic appliances (TVs, microwave ovens, lighting equipment and dimmers), and office equipment (PCs, printers).

The IEC standards that deal with Harmonics are IEC 61000-3-2 for products <16 A/phase, and IEC 61000-3-12 for products <75 A/phase.
Typical equipment for Harmonics measurement should include a pure AC power source, and a Harmonics analyzing system.
Flicker is caused by rapid power supply voltage fluctuations, which results in light luminance fluctuation. Limiting flicker is achieved by limiting the voltage variations generated across a reference load.
The IEC standards that deal with flicker are IEC 61000-3-3 and IEC 61000-3-11.
The basic instrumentation used to measure flicker has the same characteristics as the harmonics analyzer, and therefore the same type of test equipment is used. However, what needs to be added to the configuration is a reference impedance, or Flicker impedance, in order to simulate the resistance and inductance of the low voltage distribution systems. Another main difference is in the measurement, as the voltage across the point of supply is measured, rather than the current drawn by it.

 
  • Product

    Description

     
  • NSG 1007

    NSG 1007

    Programmable AC/DC power source (3 - 15 kVA) for single and three phase applications

  • ProfLine 2100 - Measurement system

    ProfLine 2100 - Measurement system

    ProfLine 2100 series consists of the measurement part only (ie. single or three phase measurement unit and software). Ideal for users who already have an appropriate amplifier and wish to measure harmonics and flicker in accordance with IEC 61000-3-2 and IEC 61000-3-3.

  • ProfLine 2130

    ProfLine 2130

    Three phase 30 kVA system (10 kVA per phase) up to 43 A to measure harmonics and flicker in accordance with IEC 61000-3-2, IEC 61000-3-3, IEC 61000-3-11 and IEC 61000-3-12.

  • ProfLine 2145

    ProfLine 2145

    Three phase 45 kVA system (15 kVA per phase) up to 62 A to measure harmonics and flicker in accordance with IEC 61000-3-2, IEC 61000-3-3, IEC 61000-3-11 and IEC 61000-3-12.

 
 
 

Imprint

AMETEK CTS GmbH
Sternenhofstr. 15
4153 Reinach, Switzerland
Tel.+ 41 61 204 41 00
marketing.cts@ametek.com

Managing Directors:
Brian Huntsman
Astrid Wälchli Schreiber
VAT-ID: CHE-179.452.414
Register of companies: CH-280.4.015.069-3


 
 
By continuing to use the site, you agree to our Privacy and Cookie Policy.