Product
Description
The NSG 4070 is a multi-functional device for carrying out EMC immunity tests to accompany development and conformity testing in accordance to IEC / EN 61000-4-6, Namur and several automotive BCI standards.
The BHA 9118 is a linearly polarised broadband antenna which is ideal for many applications particularly EMC/RF measurements.
1 MHz to 1 GHz 30 Watt Broadband Power Amplifier
1 MHz to 1 GHz 100 Watt Broadband Power Amplifier
80 MHz to 1 GHz 150 Watt Broadband Power Amplifier
80 MHz to 1 GHz 300 Watt Broadband Power Amplifier
80 MHz to 1 GHz 600 Watt Broadband Power Amplifier
80 MHz to 1 GHz 1200 Watt Broadband Power Amplifier
800 MHz to 3.1 GHz 50 Watt Broadband Power Amplifier
800 MHz to 3.1 GHz 100 Watt Braodband Power Amplifier
800 MHz to 3.1 GHz 300 Watt Broadband Power Amplifier
800 MHz to 3.1 GHz 500 Watt Broadband Power Amplifier
10 kHz TO 100 MHz 110 Watt Class A Broadband Amplifier
10 kHz to 100 MHz 400 Watt Class A Broadband Amplifier
150 kHz to 230 MHz 35 Watt Class A Broadband Amplifier
150 kHz to 230 MHz 80 Watt Class A Broadband Amplifier
10 kHz to 250 MHz 2500 Watt Class A Broadband Amplifier
10 KHz to 400 MHz 100 Watt Class A Broadband Amplifier
10 kHz to 400 MHz 260 Watt Class A Broadband Amplifier
The CBL 6111 is a high performance ultra wideband BiLog® antenna for emission and immunity EMC testing.
The CBL 6112 operates over the unprecedented, wide range 30 MHz to 2 GHz.
For RF EMC emission and immunity testing in compact anechoic chambers.
The CBL 6143 has a unique matching network which will allow powers of up to 300 watts CW to be transmitted, making it suitable for most immunity measurements requiring fields of 10 V/m, or even greater.
The CBL 6144 gives an incredible antenna factor of only 3 dB at 26 MHz together with a useable VSWR making the CBL 6144 able to deliver 10 V/m with 80% AM modulation using an amplifier power of less than 500 W (chamber dependent) at 26 MHz.
CDN AF Series
CDN CAN Series
CDN M Series
CDN S Series
CDN T Series
The CIP 9136 probe has been manufactured to drawings and specifications laid down by QinetiQ.
Reproducible emissions measurements require a defined line termination for the frequency range where connected lines provide a significant influence on the emissions.
The CFL 9206 assists in preventing damage to input circuits of measuring equipment from high level transients often encountered during conducted emission testing.
This high power dual directional coupler has been specifically designed for EMC immunity applications.
Ferrite tube for immunity test according to IEC / EN 61000-4-6, large diameter of 35 mm
The Input/Output Box, in short IOB 4000, is an ideal addition for electromagnetic immunity test systems.
ISN S series is designed for measurements on coaxial telecommunication lines.
The ISN T2 is designed for measurements on one unscreened balanced pair for cable cat. 3 and cat. 5.
The ISN T4 is designed for measurements on one or two unscreened balanced pairs for cable cat. 3 and cat. 5.
The ISN T8-Cat6 is designed for measurements on up to four unscreened single balanced pairs with cable category cat. 6.
The ITS 6006B consist of an integrated RF signal generator, RF switch and EUT monitoring interfaces. The unit is designed for various radiated EMC applications in the 80 MHz to 6 GHz frequency range.
The KEMA 801B is recommended as an additional decoupling network (ferrite tube clamp) for immunity test according to IEC/EN 61000-4-6 when using the clamp injection method.
The normative Annex A of IEC/EN 61000-4-6 gives additional information regarding the clamp injection. The KEMZ 801 is similar to the described EM clamp in the standard and injects the disturbance signal through a combination of inductive and capacitive coupling.
The monitoring device MD 4070 can be used as an active or passive current sensor probe to measure the current in a conductor without connecting it directly.
Line impedance stabilization network (LISN) such as the NNB 51 are used to measure distortion signals on the mains cord of an electrical equipment under test (EUT).
The PCJ 9201 meets all the requirements and provides additionally a save way for measuring the insertion loss of current sensing probes and monitoring probes.
The PMU 6003 is designed for connection to the USB interface. It includes software that allows multiple power meter readouts at the same time.
The PMR 6006 is designed for direct connection to the ITS 6006 Immunity Test System. Up to three power meters can be connected.
The PMU 6006 is designed for connection to the USB interface. It includes software that allows multiple power meter readouts at the same time.
The UPA 6108 and UPA 6109, suitable for CISPR/IEC/EN, FCC, MIL-STD testing, are small yet rugged antennas covering the frequency range 200 MHz - 1 GHz (UPA 6109), and 300 MHz - 1 GHz (UPA 6108).
The UPA 6108 and UPA 6109, suitable for CISPR/IEC/EN, FCC, MIL-STD testing, are small yet rugged antennas covering the frequency range 200 MHz - 1 GHz (UPA 6109), and 300 MHz - 1 GHz (UPA 6108).
The VBA 6106A is suitable for CISPR/EN, FCC and MIL-STD testing across the frequency range 30-300 MHz.
Teseq provides with the WIN 6000 a device control software with NSG 4070 and ITS 6006 for performing conducted and radiated susceptibility tests as defined by international standards.
AMETEK CTS GmbH
Sternenhofstr. 15
4153 Reinach, Switzerland
Tel.+ 41 61 204 41 00
marketing.cts@ametek.com
Managing Directors:
Brian Huntsman
Astrid Wälchli Schreiber
VAT-ID: CHE-179.452.414
Register of companies: CH-280.4.015.069-3