- Teseq worldwide
Calibration set-up with CDN
Calibration set-up with EM clamp
Calibration set-up with current injection probe
Calibration set-up of monitoring probe
Calibration set-up with external amplifier and directional coupler
EUT set-up with CDN
EUT set-up with EM clamp
EUT set-up with EM clamp and monitoring probe
EUT set-up with current injection probe
EUT set-up with current injection probe and monitoring probe
EUT set-up set-up with external amplifier and directional coupler
Calibration set-up
Calibration set-up of monitoring probe
EUT set-up
EUT set-up with monitoring probe
-
Product
Description
-
NSG 4031
The broadband immunity test system NSG 4031 has been designed for testing in accordance with IEC / EN 61000-4-31.
-
NSG 4060
EMC immunity test system for the frequency range 15 Hz to 150 kHz. It consists of a sine wave generator, power amplifier, EUT monitoring interfaces and different coupling units depending on the application, i. e. NSG 4060-1 for testing IEC / EN 61000-4-16 including short duration disturbance tests for DC, AC from 162/3 Hz to 200 Hz and test levels up to 300 V. Voltage testing according IEC / EN 61000-4-19 requires the combination with CDND M316-2. It includes the differential mode coupling and decoupling and the required 10 Ω impedance of the disturbance source. Current testing according IEC / EN 61000-4-19, e.g. testing electricity meters, requires the combination with CT 419-5.
-
NSG 4070C
The NSG 4070 is a multi-functional device for carrying out EMC immunity tests to accompany development and conformity testing in accordance to IEC / EN 61000-4-6, Namur and several automotive BCI standards.
-
ATN Series
6 dB - 50 Ω attenuators, particularly for minimising reflection losses in tests per IEC/EN 61000-4-6 also useful for general purposes.
-
CBA 1G-030D
1 MHz to 1 GHz 30 Watt Broadband Power Amplifier
-
CBA 1G-100D
1 MHz to 1 GHz 100 Watt Broadband Power Amplifier
-
CBA 100M-110
10 kHz TO 100 MHz 110 Watt Class A Broadband Amplifier
-
CBA 100M-400
10 kHz to 100 MHz 400 Watt Class A Broadband Amplifier
-
CBA 230M-035
150 kHz to 230 MHz 35 Watt Class A Broadband Amplifier
-
CBA 230M-080
150 kHz to 230 MHz 80 Watt Class A Broadband Amplifier
-
CBA 250M-2500
10 kHz to 250 MHz 2500 Watt Class A Broadband Amplifier
-
CBA 400M-110
10 KHz to 400 MHz 100 Watt Class A Broadband Amplifier
-
CBA 400M-260
10 kHz to 400 MHz 260 Watt Class A Broadband Amplifier
-
CDN AF Series
CDN AF Series
-
CDN CAN Series
CDN CAN Series
-
CDN M Series
CDN M Series
-
CDN S Series
CDN S Series
-
CDN T Series
CDN T Series
-
CDND Series
CDND Series
-
CIP 9136A
The CIP 9136 probe has been manufactured to drawings and specifications laid down by QinetiQ.
-
CIP 9138
The CIP 9138 probe has been designed for MIL-STD-461G CS114.
-
CN Series
CN Series
-
Compliance 5 Immunity
Compliance 5 is sophisticated EMC laboratory control software designed to make RF Susceptibility/Immunity testing fast, efficient, compliant, accurate and simple.
-
CT Series
CT Series
-
DCP 0100A
This high power dual directional coupler has been specifically designed for EMC immunity applications.
-
FT 801
Ferrite tube for immunity test according to IEC / EN 61000-4-6, large diameter of 35 mm
-
IOB 4000
The Input/Output Box, in short IOB 4000, is an ideal addition for electromagnetic immunity test systems.
-
ISN S Series
ISN S series is designed for measurements on coaxial telecommunication lines.
-
ISN T2
The ISN T2 is designed for measurements on one unscreened balanced pair for cable cat. 3 and cat. 5.
-
ISN T4
The ISN T4 is designed for measurements on one or two unscreened balanced pairs for cable cat. 3 and cat. 5.
-
ISN T8-Cat6
The ISN T8-Cat6 is designed for measurements on up to four unscreened single balanced pairs with cable category cat. 6.
-
KEMA 801B
The KEMA 801B is recommended as an additional decoupling network (ferrite tube clamp) for immunity test according to IEC/EN 61000-4-6 when using the clamp injection method.
-
KEMZ 801
The normative Annex A of IEC/EN 61000-4-6 gives additional information regarding the clamp injection. The KEMZ 801 is similar to the described EM clamp in the standard and injects the disturbance signal through a combination of inductive and capacitive coupling.
-
MD 4070A
The monitoring device MD 4070 can be used as an active or passive current sensor probe to measure the current in a conductor without connecting it directly.
-
PCJ 9201
The PCJ 9201 meets all the requirements and provides additionally a save way for measuring the insertion loss of current sensing probes and monitoring probes.
-
RFB 6000
RF Switch Network
-
SW 4070, SW 4070-MAN
The SW 4070 allows to switch the signal paths for having a remote controlled system and is fully powered and controlled by the NSG 4070.
-
WIN 6000
Teseq provides with the WIN 6000 a device control software with NSG 4070 and ITS 6006 for performing conducted and radiated susceptibility tests as defined by international standards.
Products
Applications
Industries
Service
Imprint
AMETEK CTS GmbH
Sternenhofstr. 15
4153 Reinach, Switzerland
Tel.+ 41 61 204 41 00
marketing.cts@ametek.com
Managing Directors:
Brian Huntsman
Astrid Wälchli Schreiber
VAT-ID: CHE-179.452.414
Register of companies: CH-280.4.015.069-3